Eu tenho um Samsung Galaxy S e estou atualmente esperando
Se eu torcer o dispositivo usando as instruções aqui , que me permitem ugrade para Froyo sobre Kies ou terei que atualizar em algum outro método?
Eu tenho um Samsung Galaxy S e estou atualmente esperando
Se eu torcer o dispositivo usando as instruções aqui , que me permitem ugrade para Froyo sobre Kies ou terei que atualizar em algum outro método?
I have a Samsung Galaxy S and am currently waiting indefinitely for the operator to pull its finger out and release its bloated edition of Froyo.
If I root the device using the instructions here, will that enable me to ugrade to Froyo over Kies or will I have to upgrade through some other method?
Olhando para o seu perfil Parece que você está sediado no Reino Unido? Se assim for, você não deve ter nenhum problema em executar o lançamento europeu da JPO da Samsung do software Galaxy S Froyo que saiu para o UK Galaxy S do Reino Unido há algumas semanas. Como este é um lançamento oficial da Samsung, não há necessidade de root para aplicá-lo, você só precisa enganar o software da Samsung para instalá-lo para você.
Para começar eu vou fazer a suposição de que você não tem problemas para executar o software Kies, que ele reconhece seu telefone quando você o conecta, e que você recebe um "você já está executando a última versão" quando você Clique no link de atualização do firmware. (Este é um grande conjunto de suposições, dada a qualidade das kies, se alguma delas não é verdade, então você precisa ter kies funcionando corretamente antes de ir mais longe).
Este post no Vodafone Uk's Galaxy S Forums estabelece os passos Samsung Galaxy S - Froyo Update (Android 2.2) (Responder 113) . Vou resumos abaixo como a Vodafone está prestes a atualizar seus fóruns para novos softwares, então não tenho idéia se o post sobreviver, ou o link ainda funcionará em uma semana ou dois anos, crédito para "ADO28" para essas instruções .
.Primeiro de tudo, você precisa entrar em Regedit e fazer algumas pequenas alterações para o registro.
Não atualize kies! Se você fizer então eu Acho que este tweak não funcionará! Os kies. versão que eu usei foi 1.5.0.10024_74, mas Eu enganei isso em pensar que era o versão mais recente
guia passo a passo
.
Backup de tudo que você deseja manter, incluindo aplicativos, números de telefone, Mensagens de texto etc porque vamos Para limpar seu telefone limpo antes de nós Iniciar!
Vá para Configurações - Privacidade - Redefinição de dados de fábrica e clique em. Segue o prompts e, em seguida, deixe limpar o seu telefone.
agora você tem um telefone nu vermelho novamente e pode prosseguir para o próximo passo.
Abra kies e deixe a execução
conectar telefone
Abrir Regedit, clicando em Iniciar - Executar - então digite
ABCDEFGHIJKLMNABCDEFGHIJKLMN0 e Pressione Digite
Role para baixo para kies e procure por "
Localver " ver foto
Altere seu código local para
1.5.3.10103.100
Agora vá para a pasta DB do dispositivo e altere suas configurações para estas:
"
SoftwareRevision " = "
I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3 "
"ProductCode " = "
GT-I9000HKDXEU "
"HIDSWVER " = "
I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3 "
"DEVCONINFO " = "" Exclua a escrita nesta caixa e deixe em branco.
.
- Agora volte para as kies e clique em "Atualizar firmware"
Isso agora permitirá que todos que tenham JPA em seu aparelho com o produto Código Xee para ser substituído por JPO e o código do produto XEU que é para o REINO UNIDO. Depois de atualizar com sucesso Em seguida, permita que o telefone seja inicializado. Uma vez inicializado você agora precisará voltar em suas configurações e mudar seu Código do produto para Xeu. Para fazer isso aberto seu teclado e digite
Localver0 e agora você estará de volta a Ter uma linda escolha de produto códigos para entrar. Escolha
ABCDEFGHIJKLMNABCDEFGHIJKLMN11 e instalar. O telefone vai reiniciar e você agora será oficialmente na JPO com o CORRETO CÓDIGO DE PRODUTO XEU!
Por favor, note que fazendo qualquer atualização no seu telefone poderia causar ti tijolo em si. O guia que escrevi trabalhou perfeito para mim, no entanto, eu não posso ser responsabilizado se o seu telefone tijolos em si. Para ser seguro sempre tente O método de recuperação de 3 botões primeiro Antes de atualizar e também fazer um reset de fábrica primeiro geralmente garante um Instalação suave de novo firmware.
Extra Nota sobre Kies: Como indicado acima, isso não funciona com a versão mais recente das Kies. Se você precisar de uma versão mais antiga de Kies, esta versão deve permitir que você faça isso (de acordo com o XDA): Kies versão 1.5.3.10093_82 .
Se você acabar desinstalando e reinstalando kies e descobrir que ele não detecta mais o seu telefone, a primeira coisa a tentar é clicar no ícone do menu no canto superior esquerdo das kies e selecionando os "drivers de instalação" opção.
Looking at your profile it looks like you're based in the UK? If so you should have no problem running the Samsung's European JPO release of the Galaxy S Froyo software that went out to unbranded UK Galaxy S's a few weeks ago. As this is an Official Samsung release there's no need to root to apply it, you just need to trick Samsung's software into installing it for you.
To start with I'll make the assumption that you have no problems running the Kies software, that it recognizes your phone when you plug it in, and that you get a "You are already running the latest release" message when you click the Firmware Upgrade link. (this is a big set of assumptions given the quality of Kies, if any of these aren't true, then you need to get Kies working properly before going further).
This post on Vodafone UK's Galaxy S forums lays out the steps Samsung Galaxy S - Froyo Update (Android 2.2) (reply 113). I'll summarise them below as Vodafone are about to upgrade their forums to new software, so I have no idea if the post will survive, or the link will still work in a week or two's time, credit to "ado28" for these instructions.
First of all you need to go into regedit and do some minor alterations to the registry.
Do not update Kies! If you do then I think this tweak wonxe2x80x99t work! The Kies version I used was 1.5.0.10024_74 but I fooled it into thinking it was the latest version
Step by step guide
Back up everything you wish to keep, including Apps, phone numbers, Text messages etc because we're going to wipe your phone clean before we start!
Go to Settings xe2x80x93 Privacy xe2x80x93 FACTORY DATA RESET and click. Follow the prompts and then let it wipe your phone.
Now you have a bare naked phone again and can proceed onto the next step.
Open up Kies and leave running
Connect phone
Open Regedit by clicking on Start xe2x80x93 Run xe2x80x93 then type in
regedit
and press enterScroll down to Kies and look for xe2x80x9c
Localver
xe2x80x9d see picChange your Localver code to
1.5.3.10103.100
Now go to your Device DB folder and change your settings to these:
"
SoftwareRevision
"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3
"
"ProductCode
"="GT-I9000HKDXEU
"
"HIDSWVER
"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3
"
"DEVCONINFO
"="" Delete the writing in this box and leave blank.
- Now go back into Kies and click "Update firmware"
This will now allow everyone who has JPA on their handset with the product code XEE to be replaced with JPO and the product code XEU which is for the UK. Once you have successfully updated then allow the phone to boot up. Once booted up you will now need to go back into your settings and change your product code to XEU. To do this open your keypad and type in
*#272*YOUR IMEI#
and now you will be back to having a lovely wee choice of product codes to enter. ChooseXEU
and install. The phone will reboot and you will now officially be on JPO with the correct product code XEU!Please note that by doing any update on your phone could cause it to brick itself. The guide I have written worked perfect for me however I canxe2x80x99t be held responsible if your phone bricks itself. To be safe always try the 3 button recovery method first before you update and also doing a factory reset first usually ensures a smooth installation of new firmware.
Extra note on Kies: as stated above, this doesn't work with the latest version of Kies. If you need an older version of Kies then this version should allow you to do this (according to XDA): Kies version 1.5.3.10093_82.
If you do end up uninstalling and reinstalling Kies and find that it doesn't detect your phone any more, then first thing to try is clicking the menu icon in the top-left corner of Kies and selecting the "install drivers" option.
Kies não jogou muito bem, mas eu encontrei este tutorial De Goots nos Fóruns da Samsung Galaxy S.
Agora estou correndo Froyo.
Kies didn't play nicely but I did find this tutorial from Goots at Samsung Galaxy S forums.
I'm now running Froyo.
Para responder sua pergunta original: Sim, quase todos os telefones Android populares têm mods comunitários (CyanogenMod, Samdroid, etc) e muitos deles estão escrevendo drivers para Froyo para muitos telefones populares.
Mods da comunidade muitas vezes são capazes de liberar drivers e atualizações muito mais rápido do que os operadores podem, uma vez que eles estão desnrandados pelas fitas vermelhas e pela política interna dos lançamentos oficiais.
A maioria dos mods comunitários está enraizada, embora algumas possam liberar a versão desrotada também.
To answer your original question: yes, almost all popular Android phones have community mods (CyanogenMod, Samdroid, etc) and many of them are writing drivers for Froyo for many popular phones.
Community mods are often able to release drivers and updates much faster than operators can since they are unbriddled by the red tapes and the internal politics of official releases.
Most community mods are rooted, although some may release unrooted version as well.
© 2022 pergunte.org All Rights Reserved. Casa de perguntas e respostas todos os direitos reservados